-64-
Model G0948 (Mfd. Since 08/21)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
Labels & Cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
201 P0948201 MODEL NUMBER LABEL 207 P0948207 READ MANUAL LABEL
202 P0948202 GRIZZLY INDUSTRIAL LOGO LABEL 208 P0948208 MACHINE ID LABEL
203 P0948203 DISCONNECT POWER LABEL 209 P0948209 GRIZZLY.COM LABEL
204 P0948204 TOUCH-UP PAINT, GRIZZLY GREEN 210 P0948210 EYE/LUNG INJURY LABEL
205 P0948205 ELECTRICITY LABEL 211 P0948211 TOUCH-UP PAINT, GRIZZLY BEI GE
206 P0948206 DO NOT OPEN DOOR LABEL
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
MODEL G0948
10" 1/2 HP BANDSAW
Specifications
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Never touch moving blade. Keep hands out of blade path.
3. Always wear approved eye protection and respirator.
4. Only plug power cord into a grounded outlet.
5. Only remove jammed cutoff pieces when blade is stopped.
6. Use push stick or holding jig to cut small or narrow pieces.
7. Disconnect power before changing blades or adjusting saw.
8. Maintain adjustment of blade tension, tracking, and guides.
9. Keep upper guide adjusted to just clear the workpiece.
10. Hold workpiece firmly against table to maintain control.
11. Only run saw with wheel covers closed and all guards in place.
12. Never reach under table while blade is in motion.
13. Remove/secure loose clothing and long hair.
14. DO NOT expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
Motor: 1/2 HP, 120V, 1-Ph, 60Hz
Full Load Amp Draw: 3.5A
Blade Speed: 1520, 2620 FPM
Standard Blade Length: 72"
Blade Length Range: 71-1/2"–72-1/2"
Blade Width Range: 1/8"–1/2"
Max. Cutting Width Left of Blade: 9-3/4"
Max. Cutting Height: 6-1/8"
Table Size: 14-3/16" x 12-5/8"
Table Tilt: 0˚L ⁄ 45˚R
Weight: 69 lbs.
Mfd. for Grizzly in China
Date
S/N
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
202
203
205
206
207
208
209
210
204
211
205
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
To Next Page
