Grizzly G1014Z - User Manual

MODEL G1014Z/G1014ZX
COMBINATION SANDER
OWNER'S MANUAL

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

G1014Z G1014ZX

Grizzly G1014Z Specifications

General

Brand	Grizzly
Model	G1014Z
Category	Sander
Language	English

Summary

Section 1: Safety Information

Safety Instructions for Machinery

Crucial safety guidelines for operating and setting up machinery.

Safety for Belt and Disc Sanders

Specific safety precautions for belt and disc sanding operations.

Section 2: Circuit Requirements

110;220 V Operation and Extension Cords

Electrical connection requirements, voltage options, and extension cord usage guidelines.

Section 3: Setup Procedures

G1014 ZX Cabinet Assembly and Sanding Unit Assembly

Calibrating Miter Gauge

Dust Collection

Test Run

Procedure for testing the machine after setup.

Section 4: Operations Guide

Horizontal & Edge Sanding

Setting Up Sander for Horizontal Sanding

Steps to configure the sander for horizontal belt operation.

Performing Horizontal or Edge Sanding

Instructions for performing horizontal and edge sanding.

Contour Sanding

To Perform Contour Sanding

Disc Sanding

To Use the Sanding Disc

Instructions for using the sanding disc for smoothing workpieces.

Vertical Sanding

Setting up Sander for Vertical Sanding

Steps to configure the sander for vertical belt operation.

Performing Vertical Sanding

Instructions for performing vertical sanding operations.

Changing Sanding Belt

To Change the Sanding Belt

Procedure for replacing the sanding belt.

Tracking Belt

To Track the Belt

Procedure for centering the sanding belt on the rollers.

Changing Sanding Disc

To Change the Sanding Disc

Procedure for replacing the sanding disc.

Section 6: Maintenance Schedule

Section 7: Service and Troubleshooting

Troubleshooting Common Issues

Solutions for common motor, electrical, and operational problems.

V-Belt Tension & Replacement

Sanding Belt Tension

Pulley Alignment

Squaring Work Table to Sanding Disc

Miter Slot-Disc Parallelism

Section 8: Wiring Information

Wiring Safety Instructions

Critical safety guidelines for electrical wiring and connections.

G1014 Z Wiring Diagram

G1014 ZX Wiring Diagram

Section 9: Parts Lists and Diagrams