4.
Figures 57 & 58
Figure 57.
Figure 58.
Note: Apply even pressure and move the
workpiece back and forth across the sanding
belt.
Sanding surfaces can cause serious person-
al injury if they come in contact with fingers,
hands or other body parts. Use extreme care
to provide a safe distance between the belt
and any part of your body.
Contour Sanding
To perform contour sanding:
1.
2.
Tracking Belt Page 40
3.
4. ON.
Figure 59.
5.
Figure59
Do not operate this equipment when wear-
ing loose clothing, gloves, neckties, rings,
bracelets or other jewelry that might get
caught in the moving belt. Serious personal
injury may result. You must re-install the
idler roller and sleeve guard before perform-
ing edge or horizontal sanding operations.
6.
To Next Page
Loading...
Need help?
General
