Sanding Spindles
Figure 19
To mount the spindle for sanding:
1.
2.
3.
Figure 20
Figure 19. Sanding spindles.
4.
Figure 21
Figure 20. Spindle threads.
NOTICE
DO NOT tighten the sanding spindle with
a wrench! The sanding action will further
tighten the spindle to the sander. Using a
wrench could make removal difficult.
To remove the spindle:
1.
2.
Figure 22
Figure 21. Mounting spindle.
Tip: If the spindle has not been removed for
some time and is stuck, run the machine until
the spindle housing heats up, then retry.
Figure 22. Spindle removal.
To Next Page
Loading...
Need help?
General
