-8-
Model G4003G (Mfd. Since 1/15)
The information contained herein is deemed accurate as of 5/17/2018 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 3 OF 3
Model G4003G
Fluid Capacities
Headstock Capacity.................................................................................................................................. 3.5 qt.
Headstock Fluid Type................................................................ ISO 32 (eg. Grizzly T23963, Mobil DTE Light)
Gearbox Capacity........................................................................................................................... 1 – 2 Pumps
Gearbox Fluid Type............................................................. ISO 68 (SB1365, Grizzly T23962, Mobil Vactra 2)
Apron Capacity......................................................................................................................................... 0.5 qt.
Apron Fluid Type.......................................................................... ISO 68 (eg. Grizzly T23962, Mobil Vactra 2)
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ...................................................................................................... 1-1/2 Hours
Serial Number Location ........................................................................................................... ID Label on Headstock
ISO 9001 Factory .................................................................................................................................................... No
Certified by a Nationally Recognized Testing Laboratory (NRTL) .......................................................................... No
Features:
1/2" SQ. Drive in Tailstock for Using Torque Wrench to Lock Tailstock Down Precisely Every Time
Min. Gun Barrel Length Through Spindle w/4-Jaw Chuck - 23" (Allowing for Barrel Sticking Out for Threading)
Removable Gap Bed Allows Turnings up to 17" in Diameter
Easy to Use Lever Controls
Full Length Splash Guard
On/Off Reverse Switch on Carriage
Halogen Work Light
Ball Bearing Steady/Follow Rests
Outboard End Support Screws
Socket for Tailstock Lock
Steel Stand with Extended Base
Cast Aluminum Gear Cover
V-Slide for Side Adjustment
Accessories Included:
1 MT#3 Live Center
1/2" Chuck with MT#3 Arbor
10" Face Plate
2 MT#3 Dead Centers (1 Carbide Tipped)
6" 3-Jaw Chuck with 2 Sets of Jaws
8" 4-Jaw Chuck with Reversible Jaws
Follow Rest with Roller Tips
Quick Change Tool Post with One Tool Holder
Steady Rest with Roller Tips
Toolbox
Set of Seven Change Gears
To Next Page
Loading...
Need help?
General
