Grizzly G7948 User Manual

-8-
Model G7947/G7948 (Mfd. Since 01/21)
The information contained herein is deemed accurate as of 2/4/2021 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3
Model G7948
Main Specifications:
Operation Information
Type........................................................................................................................................................... Floor
Swing......................................................................................................................................................... 20 in.
Spindle Taper............................................................................................................................................ MT#4
Spindle Travel........................................................................................................................................ 4-3/4 in.
Max. Distance From Spindle to Column.................................................................................................... 10 in.
Max. Distance From Spindle to Table................................................................................................. 28-1/2 in.
Number of Spindle Speeds............................................................................................................................. 12
Range of Spindle Speeds........................................................................................................... 180-3240 RPM
Max. Head Swivel................................................................................................................................. 360 deg.
Drilling Capacity (Mild Steel).................................................................................................... 1-1/4 in. in Steel
Drill Chuck Type......................................................................................................................... JT3 Key Chuck
Drill Chuck Size............................................................................................................................. 3/64 – 5/8 in.
Spindle Information
Distance From Spindle to Base........................................................................................................... 50-1/4 in.
Quill Diameter....................................................................................................................................... 2.825 in.
Table Information
Max. Table Tilt (Left/Right)..................................................................................................................... 90 deg.
Table Swing.......................................................................................................................................... 360 deg.
Table Swivel Around Center................................................................................................................... 78 deg.
Table Swivel Around Column............................................................................................................... 360 deg.
Max. Movement of Work Table.................................................................................................................. 22 in.
Table Length........................................................................................................................................ 18-3/4 in.
Table Width......................................................................................................................................... 16-3/4 in.
Table Thickness.................................................................................................................................... 1-1/2 in.
Vertical Table Travel.................................................................................................... Crank Handle Operation
Number of T-Slots............................................................................................................................................ 3
T-Slot Size................................................................................................................................................ 5/8 in.
T-Slot Centers....................................................................................................................................... 4-1/4 in.
Floor-To-Table Height........................................................................................................................ 25 – 47 in.
Construction
Table....................................................................................................................... Precision-Ground Cast Iron
Column....................................................................................................................................................... Steel
Spindle Housing................................................................................................................................... Cast Iron
Head.................................................................................................................................................... Cast Iron
Base..................................................................................................................................................... Cast Iron
Paint Type/Finish.................................................................................................................................... Enamel
Other Related Information
Base Length............................................................................................................................................... 23 in.
Base Width.......................................................................................................................................... 17-1/2 in.
Mobile Base........................................................................................................................................... D2057A
Column Diameter.................................................................................................................................. 3.642 in.
Depth Stop Type.......................................................................................................................................... Hub
Has Work Light............................................................................................................................................. Yes
Light Socket Type....................................................................................................................... 120V, Std Bulb
Maximum Bulb Wattage............................................................................................................................. 60 W

Grizzly G7948 Specifications

General

Brand	Grizzly
Model	G7948
Category	Drill
Language	English