-6-
Model G7947/G7948 (Mfd. Since 01/21)
The information contained herein is deemed accurate as of 2/4/2021 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3
Model G7947
Main Specifications:
Operation Information
Type........................................................................................................................................................... Floor
Swing......................................................................................................................................................... 17 in.
Spindle Taper............................................................................................................................................ MT#3
Spindle Travel........................................................................................................................................ 4-3/4 in.
Max. Distance From Spindle to Column................................................................................................ 8-1/2 in.
Max. Distance From Spindle to Table........................................................................................................ 29 in.
Number of Spindle Speeds............................................................................................................................. 12
Range of Spindle Speeds.......................................................................................................... 180–3240 RPM
Max. Head Swivel................................................................................................................................. 360 deg.
Drilling Capacity (Mild Steel)........................................................................................................... 1 in. in Steel
Drill Chuck Type......................................................................................................................... JT3 Key Chuck
Drill Chuck Size............................................................................................................................. 3/64 – 5/8 in.
Spindle Information
Distance From Spindle to Base........................................................................................................... 50-1/4 in.
Quill Diameter......................................................................................................................................... 2.85 in.
Table Information
Max. Table Tilt (Left/Right)..................................................................................................................... 90 deg.
Table Swing.......................................................................................................................................... 360 deg.
Table Swivel Around Center................................................................................................................. 360 deg.
Table Swivel Around Column............................................................................................................... 360 deg.
Max. Movement of Work Table............................................................................................................ 21-1/2 in.
Table Length........................................................................................................................................ 13-5/8 in.
Table Width......................................................................................................................................... 13-5/8 in.
Table Thickness.................................................................................................................................... 1-1/2 in.
Vertical Table Travel.................................................................................................... Crank Handle Operation
Number of T-Slots............................................................................................................................................ 2
T-Slot Size................................................................................................................................................ 5/8 in.
Floor-To-Table Height................................................................................................................. 24 – 45-1/2 in.
Construction
Table....................................................................................................................... Precision-Ground Cast Iron
Column....................................................................................................................................................... Steel
Spindle Housing................................................................................................................................... Cast Iron
Head.................................................................................................................................................... Cast Iron
Base..................................................................................................................................................... Cast Iron
Paint Type/Finish.................................................................................................................................... Enamel
Other Related Information
Base Length........................................................................................................................................ 22-1/2 in.
Base Width.......................................................................................................................................... 14-1/2 in.
Mobile Base........................................................................................................................................... D2057A
Column Diameter.................................................................................................................................. 3.605 in.
Depth Stop Type............................................................................................ Threaded Rod with Positive Stop
Has Work Light............................................................................................................................................. Yes
Light Socket Type....................................................................................................................... 120V, Std Bulb
Maximum Bulb Wattage............................................................................................................................. 60 W
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ........................................................................................................ 45 Minutes
Serial Number Location ................................................................................................................... ID Label on Head
ISO 9001 Factory .................................................................................................................................................. Yes
Certified by a Nationally Recognized Testing Laboratory (NRTL) ......................................................................... Yes
To Next Page
Loading...
Need help?
General
