GROOMING MOWERS - SGM Series - Models SGM 48-60-72-84
33
Lubricate the swivel wheel yokes every 8 working hours through the grease fittings points placed
on the wheels support (A - see picture).
Depending on their type, the wheels may present a grease lubrication point for wheel bearings (B).
If so, perform lubrication every 8 hours.
IMPORTANT
Make sure to clean the fitting zerk before using the grease gun.
Do not let excess grease collect on or around parts, particularly when operating in sandy areas.
6.7. DRIVESHAFT MAINTENANCE
Lubricant: SAE multi-purpose lithium-type grease
Grease crosses, sliding parts of protective shielding and driveshaft transmission tubes (see picture
below) every 8 working hours.
IMPORTANT
For details about maintenance and lubrication of the driveshaft, refer to the user manual of the
driveshaft Manufacturer.
NOTE
For replacement of the driveshaft service parts, refer to the user manual of the driveshaft Manufac-
turer.
To Next Page
Loading...
Need help?
General
