GROOMING MOWERS - SGM Series - Models SGM 48-60-72-84
1
1. ABOUT THIS MANUAL
The operator must read the manual for a correct understanding of the hazards that may present
when operating the mower, as well as for obtain optimum performance from the machine.
The manual is part of the machine, it must be kept in good condition and remain with the machine
even in case of resale, until its demolition. In case of loss or damage, request a new copy to the
Manufacturer or your Dealer.
The information, descriptions and illustrations in this manual describe the state of the product at
the time of its publication, and may not reflect the product in the future.
The Manufacturer reserve the right to make design improvements or changes in specifications
without incurring in any obligation to install them on units previously sold.
Text, illustrations and drawings of this manual cannot be disclosed or transmitted, in whole or in
part, to third parties without the written permission of the Manufacturer. All rights are reserved.
2. INTRODUCTION
2.1. IDENTIFICATION
Each mower is provided with a plate for unique identification (see picture below), showing the CE
marking together with following information:
• Manufacturer name and address
• Type of machine ("TYPE")
• Model of machine ("MODEL")
• Serial number ("SERIAL No.")
• Construction year ("YEAR")
• Machine weight ("MASS")
• Speed required at Implement Input Connection ("INPUT").
It's recommended to note down all data shown on the plate.
Any request for assistance or information regarding the machine must be directed to the Manufac-
turer or Dealer always referring to the model and serial number as shown on the plate affixed to
the machine.
To Next Page
Loading...
Need help?
General
