GROOMING MOWERS - SGM Series - Models SGM 48-60-72-84
2
2.2. INTENDED USE
The SGM-series grooming mowers are specifically designed for lawn and grass professional mow-
ing and maintenance of areas like private lawns, parks, airports, hospital grounds, schools, high-
ways, golf courses etc.
The SGM mowers are NOT designed for rough conditions or heavy weed mowing.
The SGM mowers can be either tractor front or rear mounted on universal three point hitch, and
are driven by the tractor power through a PTO driveshaft connected to a speed multiplier gearbox.
The power is transmitted by means of two belts from a pulley coupled to the gearbox shaft to
three pulleys coupled to individual spindle shafts. Each shaft is equipped with a suction type blade
turning at a high tip speed for best results in mowing.
The mowers are provided with 4 swivel wheels that allow to follow the contour of the ground, giv-
ing a precise and level cut even in undulating conditions.
The tractors used to operate the SGM-series mowers must have the following requirements:
Hitch Category: 3-point, Category 1 (ISO 730 standard)
PTO: 540 RPM , 6 – SPLINE , 13/8 “26
Horsepower: As per technical specification.
Any use of the machine other than the intended use is non-intended use, and is to be considered
as unauthorized and dangerous. The manufacturer assumes no liability for damage resulting from
non-intended use.
To Next Page
Loading...
Need help?
General
