Growatt MID 1 7 KTL3-X1 - Install the Wall Mount; Installing the Inverter

5.2 Install the wall mount
5.2.1 Install the wall mount
Danger
To prevent electric shock or other damage, be sure to check
the wa for power or other piping before opening the hole in
the wall.
Fig 5. 7 Specifications of wall mount
Secure the wall mountas shown, do not let the screws flush with the wall, instead
expose 2 to 4 mm.
Fig 5.8 Schematic diagram of wall mount installation
5.3 Installing the inverter
Note: Before installing the inverter, you must first make sure that the wall mount
is firmly fixed to the wall.
steps:
1 .Hang the inverter onthewall mountand keepthe inverter balanced when hanging.
2.To ensure that the inverter can be securely attached to the wall, secure the side
of the inverter with the M5 safety screw on the left.
keep the bracket /
installed horizontally