OLED display and touch button 9
The OLED display can display the running status of the inverter, as well as
various parameters information, and the display interface of the inverter can
be switched and the inverter parameters can be set by touching the button.
9.1 Boot display
When the inverter is turned on, the OLED display interface is as follows:
9.2 OLED display wake up
After the inverter works normally for 5 minutes, the OLED display will be automat-
ically turned off. At this time, there is no display on the OLED, and the leaf of the
indicator window is green. You need to view the display data or make settings to
make the OLED display again through touch operation.
Switch the display interface or
the current number plus 1
Enter the setting state
or confirm
Return to the previous dis-
play
interface
The current data returns to
the default value
To Next Page
Loading...
