Manufacturer warranty 14
Please refer to the warranty card.
Decommissioning 15
15.1 Dismantling the Inverter
1. Disconnect the inverter as described in section8.
2. Remove all connection cables from the inverter.
Danger of burn injuries due to hot enclosure parts!
Wait 20 minutes before disassembling until the housing has cooled
down.
3. Screw off all projecting cable glands.
4. Lift the inverter off the bracket and unscrew the bracket screws.
15.2 Packing the Inverter
If possible, always pack the inverter in its original carton and secure it with tension
belts. If it is no longer available, you can also use an equivalent carton. The box
must be capable of being closed completely andmadetosupportboththe-
weightandthesizeof the inverter.
15.3 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between -
25°C and +60°C.
Do not dispose of faulty inverters or accessories together with house-
hold waste. Please accordance with the disposal regulations for elec-
tronic waste which apply at the installation site at that time. Ensure
that the old unit and, where applicable, any acc essories are disposed
ofina proper manner
1 5.4 Disposing of the Inverter
To Next Page
Loading...
