Growatt MID 1 7 KTL3-X1 - Connect the Signal Cable

Connect DC terminal
Cables
Positive metal terminal
Cables
Negat ive metal terminal
Positive connector
Negat ive connector
Fig 6.7
6.4 Connect the signal cable
The MID series inverter hasan 16-Pin signal connector except Vietnam models.The
client signal lineportisas follows:
Fig 6.8
1.Strip the cable 10mm through the waterproof gland, thread sleeve, and tighten
the
screws.
B just for Vietnam models
A
B just for Vietnam models
Fig 6.9