Growatt MID 1 7 KTL3-X1 - Page 136

AC connection steps(just for Vietnam models):
1 .Pass the 5 wires (L1,L2,L3,N and PE wires) through the AC shield,connect them
to the power grid, and then crimp the O/U terminal.
Fig 6.2
2.Lock the AC cable to the corresponding AC terminal.
Fig 6.3
3.Lock the protective cover on the inverter frame, and finally tighten the protective
cover hole.
Noted:Waterproof must be blocked with fireproof mud to prevent water.
Fig 6.4