Growatt MIN 2500TL-XH - Storage of Inverter; The Advantage of the Unit; 4 Unpacking and Inspection

17
Dimensions and weight
Model
Height (H)
Width (W)
Depth (D)
Weight
MIN 2500-6000 TL-XH
350mm 13.8inch
375mm 14.8inch
160mm 6.3inch
10.8kg
3.4 Storage of Inverter
If you want to storage the inverter in your warehouse, you should choose an
appropriate location to store the inverter.
 The unit must be stored in original package and desiccant must be left in the
package.
 The storage temperature should be always between -25℃and +60℃. And the
storage relative humidity can achieve to 100%.
 If there are a batch of inverters need to be stored, the maximum layers for original
carton is four.
 After long term storage, local installer or service department of GROWATT
should perform a comprehensive test before installation.
3.5 The advantage of the unit
 Maximum efficiency of 98.4%
 Wide input voltage range from 80--550Vdc
 Reactive power regulate
 Integrated DC switch
 Multi MPP controller
 DSP controller
 Touch control
 Multi active power control mode
 Easy installation
 Intelligent DC arc fault detection(AFCI)
4 Unpacking and inspection
The inverter is thoroughly tested and inspected strictly before delivery. Our inverters
leave our factory in proper electrical and mechanical condition. Special packaging
ensures safe and careful transportation. However, transport damage may still occur.
The shipping company is responsible in such cases. Thoroughly inspect the inverter
upon delivery. Immediately notify the responsible shipping company if you discover