Please don’t connect PV array positive or negative pole to the ground, it could
cause serious damages to the inverter
Check the connection cables of the PV modules for correct polarity and make
sure that the maximum input voltage of the inverter is not exceeded.
Connection of PV terminal
6.5 Connecting the Bidirectional DC/DC Box
6.5.1 Conditions for Bidirectional DC/DC Box
The MIN TL-Xh single-phase inverter has one independent BAT input : BAT+/BAT-
connecting to the output of Bidirectional DC/DC Box.
Notice that the connectors are in paired (male and female connectors). The connectors
for Bidirectional DC/DC Box and inverters are Helios H4-R/VP-D4/MC4 connectors;
To Next Page
Loading...
