This series inverter has integrated export limitation functionality. To use this function,
you can connect smart meter or CT. The smart meter model is Eastron
SDM230-Modbus. The CT Model is TOP 90-S10/SP4(LEM).The primary aperture is
10mm,output cable length is 5m . The arrow on the CT must pointing towards the
inverter,System connection block diagram is as follows:
Active power control with a Radio Ripple Control Receiver(RRCR).
6.9 Connecting the COM PORT
This series inverter has a 8 Pin COM PORT, this port has the function fo demand response
modes, for Australian mode, we can use the 8 Pin COM PORT as inverter DRED connection, for
European modes, we can use the 8 Pin COM PORT as Power Control Interface(PCI).
To Next Page
Loading...
