6.9.1 Inverter demand response modes-DRMs(Australia
only)
This series inverter has the function of demand response modes, We use 8Pin COM
PORT as inverter DRED connection.
DRMS application description
Only applicable to AS/NZS4777.2:2015.
DRM0-DRM8 are available.
Damage to the inverter due to moisture and dust penetration
Make sure the cable gland has been tightened firmly.
If the cable gland are not mounted properly, the inverter can
be destroyed due to moisture and dust penetration. All the
warranty claim will be invalid.
6.9.1.1 8Pin socket pin assignment
Assignment for inverters
capable of both charging
and discharging
6.9.1.2 Method of asserting demand response modes
Socket Asserted
by shorting pins
Operate the disconnection device
Do not consume at more than 50% of rated power