Growatt MOD 11KTL3-X Manual

2.3.2 Electrical Connection Warnings
> The components in the inverter are live. Touching live components
can result in serious injury or death.
• Do not open the inverter except the wire box by qualified persons.
• Electrical installation, repairs and conversions may only be carried out
by electrically qualified persons.
• Forbid live line work.
> Danger to life due to high voltages in the inverter
• There is residual voltage in the inverter after the device shutdown. The
inverter need to take 20 minutes to discharge for safety.
> Persons with limited physical or mental abilities may only work with
the Growatt inverter following proper instruction and under constant
supervision. Must keep the Growatt inverter away from children.
> Make all electrical connections (e.g. conductor termination,
fuses, PE connection, etc.) in accordance with prevailing regu-
lations. When using the inverter to provide the power, adhere
to all prevailing safety regulations to minimize risk of acci-
dents.
> Systems with inverters typically require additional control (e.g.,
switches, disconnects) or protective devices (e.g., fusing circuit break-
ers) depending upon the prevailing safety rules.
6
DANGER
WARNING

Growatt MOD 11KTL3-X Specifications

General

Product type	-
Maximum power	11000 W
Output current	18.3 A
Output frequency	50/60 Hz
MPP voltage range	140 - 1000 V
Number of strings per MPPT	1
Output power capacity (max)	11 kVA
Input operation voltage (max)	1100 V
Input operation voltage (min)	160 V
Maximum input current per MPPT	13 A
Output operation voltage (max)	440 V
Output operation voltage (min)	340 V
Total Harmonic Distortion (THD)	3 %
Number of maximum power point tracking (MPPT)	2
Operating temperature (T-T)	-25 - 60 °C
Built-in display	Yes
Display technology	OLED
Product color	White
Overvoltage category	CAT II
Power protection features	Over voltage, Short circuit
International Protection (IP) code	IP66

Weight and Dimensions

Depth	178 mm
Width	425 mm
Height	387 mm