Growatt MOD 11KTL3-X Manual

Tips and disclaimers
When the inverter leaves the factory, the grid-connected voltage and frequency are set in ac-
cordance with the latest domestic standard;
If the grid voltage is lower or higher than the domestic legal requirements, the inverter cannot
be connected to the grid. After obtaining the permission of the local power operator, the user
can choose other voltage levels according to the voltage situation of the grid connection
point.
Excessive grid voltage may affect the normal use and service life of home appli-
ances on the grid-connected side,or cause loss of power generation. Our company
does not accept any responsibility for the related impacts and consequences
caused by enabling the automatic control function of output voltage to connect
to the grid.
9.3.3 Set language
The default language is English,touch twice in a row to enter the setting mode,a single touch
to switch the language, and touch twice to confirm the setting.
Fig 9.4
9.3.4 Set COM address
The default COM address is 1.Touch twice in a row to enter the setting mode, single touch, the
number +1,touch twice in a row to confirm the setting,long press for 5S number to return to
zero.
Fig 9.5
9.3.5 Set date and time
Touch twice to enter the parameter setting submenu, select the general setting,touch twice to
enter the general setting submenu, single touch to switch the display interface, touch twice in
the date and time interface to enter the setting state,single touch,number +.
34

Growatt MOD 11KTL3-X Specifications

General

Product type	-
Maximum power	11000 W
Output current	18.3 A
Output frequency	50/60 Hz
MPP voltage range	140 - 1000 V
Number of strings per MPPT	1
Output power capacity (max)	11 kVA
Input operation voltage (max)	1100 V
Input operation voltage (min)	160 V
Maximum input current per MPPT	13 A
Output operation voltage (max)	440 V
Output operation voltage (min)	340 V
Total Harmonic Distortion (THD)	3 %
Number of maximum power point tracking (MPPT)	2
Operating temperature (T-T)	-25 - 60 °C
Built-in display	Yes
Display technology	OLED
Product color	White
Overvoltage category	CAT II
Power protection features	Over voltage, Short circuit
International Protection (IP) code	IP66

Weight and Dimensions

Depth	178 mm
Width	425 mm
Height	387 mm