Growatt SPH Series Operation Manual

13 Certificate
Growatt SPH series inverter apply within the scope of the world, So the inverter have to
satisfy different countries and regions of different safety standards.
Model
Certificate
Growatt-SPH series
IEC 62040, VDE-AR-N 4105, VDE 0126, UTE C 15-712,
EN50549, TR3.2.1, TR3.3.1 , CEI 0-21, IEC62116,
IEC61727, AS/NZS 4777 , G98, EN61000-6-1, EN61000-
6-3, IEC/EN62109-1, IEC/EN62109-2
57
58
14 Contact
GROWATT NEW ENERGY TECHNOLOGY Co.,LTD
ØNo.28 Guangming Road, Longteng Community, Shiyan,
ØBao'an District, Shenzhen, P.R.China
Øwww.ginverter.com
ØServiceline
ØTel： + 86 755 2747 1942
ØEmail： service@ginverter.com
If you have technical problems about our products, contact the Growatt Service line or
dealer. We need the following information in order to provide you with the necessary
assistance:
1.SPH inverter Serial number.
2.SPH inverter module information.
3.SPH inverter communication mode.
4.SPH inverter fault information code.
5.SPH inverter Display content.
6.The manufacturer and model of the battery.
7.Battery capacity and connection mode.
Annex:
AutoTest (only for Italy)
Follow is the chart of Auto Test, refer to 6.4.4. in the set up surface of “Auto Test”. Press
the “enter” key, make sure to start auto test by press “enter” key 3 seconds. The LCD will
display the follow message.
59.S2 Limit
Waiting to start
264.5 V 200ms
59.S2 Limit
195.5 V 400ms
27.S1 Limit
51.5Hz 100ms
81>S2 Limit
253.0V 3000ms
59.S1 Limit
WorkMode
YES ?
Press “enter”more than 3
seconds to enter
WorkMode
Auto Test
230.8 V - xxx V
59.S2 Testing
264.7 V 180ms
59.S2 Pass
230.8 V - xxx V
59.S2 Testing
194.7 V 380ms
59.S2 Pass
50.01-xxxxHz
81>S2 Testing
51.52Hz 80ms
81>S2 Pass
47.50Hz 100ms
81<S2 Limit
50.01-xxxxHz
81<S2 Testing
47.49Hz 80ms
81<S2 Pass
230.4 - xxxxV
59.S1 Testing
254.7V 3000ms
59.S1 Pass
92.0V 200ms
27.S2 Limit
230.4- xxxxV
27.S2 Testing
90.8V 180ms
27.S2 Pass
50.5Hz 100ms
81>S1 Limit
50.01- xxxxHZ
81>S1 Testing
50.05Hz 80ms
81>S1 Pass
49.5Hz 100ms
81<S1 Limit
50.01- xxxxHZ
81<S1 Testing
49.5Hz 80ms
81<S1 Pass
Auto Test Passed
Auto Testing

Growatt SPH Series Specifications

General

Type	Hybrid Inverter
Max. Input Voltage	600V
Number of MPPTs	2
Protection Rating	IP65
Output Power Range	3kW - 10kW
Rated AC Output Power	3-10 kW
Communication Interfaces	RS485, USB, Wi-Fi
Output Voltage	230 V
Frequency	50/60 Hz
Operating Temperature	-25°C to 60°C
Cooling Method	Natural Convection