Growatt SPH Series - Safety Measures; Symbol Introduction

5
6
3 Product Description
3.1 Growatt SPH series inverter
Marks of SPH
Mark
Description
Explanation
Push-button
Status symbol of SPH
Operation of display screen and set system
Green light on
Red light on
Green light blinking
Red light blinking
SPH run normally
fault state
Alarm state
Software updating
3.2 Label Explanation
Label contains the following information: for example SPH 10000TL3 BH shows as below:
Caution: risk of danger!
Danger to life due to high voltage in SPH.
There is residual voltage in SPH, SPH requires 5 minutes to
discharge.
Please wait 5 minutes before you open the upper lid or the DC lid.
Protective conductor terminal
Direct Current(DC)
Alternating Current(AC)
Refer to the operating instructions.
The machine complies with the requirements of the applicable
CE guidelines
21