PHP A-1 Instruction Manual / Contents
02
Table of Contents
1. General
2. Mounting
2.1 Installing the device
2.2 Makeup PHP
2.3 Changing the positions of the hydraulic connections
2.4 Usage of devices without degassing
2.5 Usage of cooling vessels
2.6 Temperature sensor T2
2.7 Electric connection
3. Hydraulic diagrams
4. Wiring diagrams
5. Operation and display
5.1 Switching on
5.2 User and display elements
5.3 Display
5.4 Scroll and change values
5.5 Display level
5.6 User level 2
5.7 User level 3
5.8 Manual mode
5.9 Timer programs
6. Commissioning PHP A-1
6.1 Commissioning PHP
6.2 Commissioning the make-up water BREAKTANK
6.3 Commissioning the make up water PUMPS
7. Warnings and fault messages
8. Cleaning and maintenance
8.1 Cleaning
8.2 Maintenance
9. Technical data
9.1 PHP
9.2 Additional expansion vessels for
combination with PHP
10. Spare parts list
11. Hazard notes
12. Appendix
13. EC declaration of Conformity
NOTE
Figures in this document can vary due to model and
configuration of the delivered PHP device.
INFORMATION
This document refers to PHP series devices with software
version V1.23. Design and operation can vary slightly due
to the existing software version.
DISCLAIMER
We improve out products permanently and so we
reserve the right to make modifications anytime and
without previous announcements. We do not assume
any guarantee for the correctness and completeness
of this document.
Any claims, particularly claims for damages and loss of
profit or financial losses must be excluded.
To Next Page
Need help?
General
