Grundfos TP - Page 32

A.3. Minimum inlet pressure, 50 Hz, 6-pole
Pump type
(50 Hz)
p [bar]
20 °C 60 °C 90 °C 110 °C 120 °C 140 °C 150 °C
TP, TPD 125-60/6 0.1 0.1 0.1 0.7 1.2 2.8 -
TP, TPD 125-70/6 0.1 0.1 0.1 0.7 1.3 2.9 -
TP, TPD 125-80/6 0.1 0.1 0.1 0.7 1.2 2.9 -
TP, TPD 125-100/6 0.1 0.1 0.1 0.8 1.4 3.0 -
TP, TPD 125-130/6 0.1 0.1 0.1 0.7 1.3 2.9 -
TP, TPD 125-160/6 0.1 0.1 0.1 0.7 1.3 2.9 -
TP, TPD 150-60/6 0.1 0.1 0.1 0.7 1.3 2.9 -
TP, TPD 150-70/6 0.1 0.1 0.1 0.7 1.3 2.9 -
TP, TPD 150-90/6 0.1 0.1 0.1 0.8 1.3 2.9 -
TP, TPD 150-110/6 0.1 0.1 0.1 0.8 1.3 3.0 -
A.4. Minimum inlet pressure, 60 Hz, 2-pole
Pump type
(60 Hz)
p [bar]
20 °C 60 °C 90 °C 110 °C 120 °C 140 °C 150 °C
TP 32-80/2 0.4 0.4 0.4 1.2 1.7 3.4 -
TP 32-160/2 0.4 0.6 1.1 1.9 2.4 4.1 -
TP 32-220/2 0.7 0.9 1.4 2.2 2.7 4.4 -
TP 32-260/2 0.7 0.9 1.4 2.2 2.7 4.4 -
TP 32-330/2 0.7 0.9 1.4 2.2 2.7 4.4 -
TP, TPD 32-300/2 0.1 0.1 0.1 0.7 1.2 2.8 -
TP, TPD 32-360/2 0.1 0.1 0.1 0.7 1.2 2.8 -
TP, TPD 32-450/2 0.1 0.1 0.1 0.7 1.2 2.8 -
TP, TPD 32-550/2 0.1 0.1 0.1 0.7 1.2 2.9 -
TP, TPD 32-680/2 0.1 0.1 0.2 0.9 1.5 3.1 -
TP, TPD 32-820/2 0.5 0.7 1.2 1.9 2.5 4.1 -
TP 40-80/2 0.1 0.3 0.8 1.6 2.1 3.8 -
TP 40-160/2 0.1 0.2 0.7 1.5 2.0 3.7 -
TP 40-240/2 0.4 0.6 1.1 1.9 2.4 4.1 -
TP 40-270/2 0.7 0.9 1.4 2.2 2.7 4.4 -
TP 40-330/2 0.7 0.9 1.4 2.2 2.7 4.4 -
TP 40-390/2 0.7 0.9 1.4 2.2 2.7 4.4 -
TP, TPD 40-400/2 0.1 0.1 0.1 0.9 1.4 3.1 -
TP, TPD 40-460/2 0.1 0.1 0.3 1.0 1.6 3.2 -
TP, TPD 40-530/2 0.1 0.1 0.4 1.1 1.7 3.3 -
TP, TPD 40-690/2 0.1 0.2 0.7 1.4 2.0 3.6 -
652
Appendix A