17
Chapter 3: Operation
This chapter will give detailed operation instructions on how to use each preprogrammed mode.
The Model 672 is designed to operate from the 5 soft keys or the dedicated keys of the keypad. The
advantage of using the soft keys is they are placed in succession for easy operation.
BASIC WEIGH
Follow the steps below to perform a sample and count parts.
Sample and Count
AUTO TARE METHOD
1. Sampling Pieces:
(a) If a container is used:
(i) Place container on scale and press the
9 key. The scale will automatically
tare the container.
- or -
(b) If a container is not used:
(i) Press the
9 key without the sample pieces on the scale. The scale will tare to
establish a net zero reference.
2. Add the sample pieces and press the
9 key to accept the sample.
3. Continue to add pieces to count.
WITHOUT AUTO TARE
1) If the sample size is known and a container is used:
a. Place an empty container on the scale and press
: key.
TIP
Bypass the GSE splash screen on power up by pressing the K key when the splash
screen appears.
To Next Page
Loading...
