Chapter 4: Control Panels
5. Set the temperature setpoints for the plenum and grain temperature by clicking on the dark blue
area of the Grain Temp Setpoint and Plenum Temp Setpoint buttons.
NOTE: The number displayed in the light blue area is the current temperature of the drying grain
and the plenum.
6. Set the temperature high limits by clicking on the dark blue area of the Grain Max Temp button and
the Plenum Max Temp button.
NOTE: The current settings are shown in the light blue are of the button.
7. Click the Exit button to return to the main menu.
Pneg–4900 TopDry Terminal™ 45
To Next Page
Loading...
Need help?
General