Chapter 1: Safety Precautions
Install and Operate Equipment Properly
• Make sure grain chutes are empty by performing a manual
dump before entering the bin.
• Before attempting to remove and reinstall the fan blade, con-
tact GSI for the recommended procedure.
ST-0031–2
For Your Safety
• If you smell gas:
— Do not try to light any appliance.
— Extinguish any open flames.
— Do not touch any electrical switch.
— Immediately call your gas supplier. Follow the gas suppli-
er’s instructions.
— If you cannot reach your gas supplier, call the fire
department.
• The use and storage of gasoline and other flammable vapors
and liquids in open containers in the vicinity of this appliance
is hazardous.
• Improper installation, adjustment, alteration, service or main-
tenance can cause property damage, injury or death. Read
the installation, operating and maintenance instructions thor-
oughly before installing or servicing this equipment. Installa-
tion and service must be performed by a qualified installer,
service agency or the gas supplier.
ST-0024–1
Install and Operate Electrical Equipment Properly
• Electrical controls must be installed by a qualified electrician
and must meet the standards set by the National Electric
Code, Canadian Electrical Code, and all local and state
codes.
• Lock-out power source before making adjustments, cleaning,
or maintaining equipment.
ST-0027–2
8 Pneg–4900 TopDry Terminal™
To Next Page
Loading...