www.gtec-power.de 21
Figure 2-1 Space reserved for the cabinet (Unit: mm)
The dimension and weigh for the UPS cabinet is shown in Table 2-1
Table 1.1 Weight for the cabinet
100kg (No Batteries Included)
100kg (No Batteries Included)
100kg (No Batteries Included)
140kg (No Batteries Included)
140kg (No Batteries Included)
2.2 Unloading and Unpacking
2.2.1 Moving and Unpacking of the Cabinet
The steps to move and unpack the cabinet are as follows：
1. Check if any damages to the packing. (If any, contact to the carrier)
2. Transport the equipment to the designated site by forklift, as shown in Figure2-2.
To Next Page
Loading...
