10
1
3
4
2
MECHANICAL INSTALLATION
WARNING! Check to ensure that no parts have become loose during transportation.
Depending upon the shipping location, the final destination and the method of shipment, various
degrees of re-assembly may be required before initial operation. All of the necessary hardware will
be provided with the machine. Refer to the parts list drawings later in this manual for more
assembly details.
1. The Starter Switch Assembly may need to be re-orientated or re-attached;
2. The handle bars may need re-attaching;
3. The Clamp Roller Assembly may need re-attaching;
4. The Chip Pan may need re-inserting into the optional undercarriage assembly.
5. The anti-rust grease will need to be wiped off prior to use.
To Next Page
Loading...