GULLCO KBM-18 - Page 58

54
REVISIONS LIST
October, 2006
Page 40 Changed 2 x mounting bolts from BHCS to Hex Bolts.
Page 41 & 43 Updated to reflect common components between 380V & 415V 50Hz machines.
November, 2006
Title Page Updated Gullco Australia’s phone and fax numbers.
January, 2007
Title Page Updated Gullco India’s contact details and Gullco USA’s e-mail address.
Page 7 Updated the product label.
Page 30 Added instruction to store/ship machine with cutter in place to avoid loss of spacer.
March, 2007
Title Page Updated Gullco contact details.
Page 7 Updated the product label.
Page 41 Manual Starter for 575V was GBM-18-019-02 (now GBM-18-019-03).
Page 43 Updated wiring schematic including new Current Trip Point Values (F.L.A. ratings).
General Changed references of 415V to 400/415V.
January, 2008
Title Page Updated Gullco contact details.
Page 7 Revised the S.C. Rating on the Product labels.
Page 32 Inserted additional Troubleshooting page (resulted in page numbering changes).
General Revised to reflect optional undercarriage.
February, 2008
Page 44 Added KBM-18 Gearbox Input Assembly Breakdowns page.
March, 2008
Page 43 Added Part Number KBM-18-126 to page.
April, 2008
Pgs 43-45 Updated Motor and Gearbox Breakdown Assemblies.
October, 2008
Page 33 Added trouble shooting details of when to move the Support Rollers in (resulted in
page numbering changes)
October, 2015
Title Page Updated Gullco contact details.
Overall General update to include optional hydraulic undercarriage, KBM-18-080.
September, 2017
Title Page Updated Gullco contact details.
Overall General update to include wear plates, drawings KBM-18-212 (item 1) & KBM-18-
100 (item 45).