GW Instek GDM-8200A Series - Specifications; Specifications General; Reading Rates (Readings;Sec)

APPENDIX
113
Specifications
General
Note
 All specifications are ensured only under a single display.
 At least 30 minutes of warm-up time is required before
applying these specifications.
 Make sure the power ground is connected.
Resolution
Type Digit
Slow (S) 5 ½ Digit
Medium (M) 4 ½ Digit
Fast (F) 3 ½ Digit
Operation
Environment
Ambient Temperature 0°C ~ 40°C, Relative Humidity < 75%
(For full accuracy: 18°C ~ 28°C)
Temperature
Coefficient
< 0.2 x applicable accuracy per degree (°C)
(for 0°C ~ 18°C and 28°C ~ 40°C)
Storage
Environment
Ambient Temperature −10°C ~ 70°C
Relative Humidity: 0°C ~ 35°C < 75%, 35°C ~ 50°C < 50%
Power Source AC 100–240V ± 10%, 50–60Hz
Dimension 265(W) x 107(H) x 350(D) mm
Weight Approx. 2.6kg without option
Reading rates (readings/sec)
Function Rate
S M F
DCV 10 30 60
DCI 10 30 60
ACV 1 5 20
ACI 1 5 20
2/4WΩ
(10M/100MΩ)
1 1.5 2
2/4WΩ (others)
3 5 8
ACV+DCV 0.5 1 3
ACI+DCI 0.5 1 3
Diode 30 30 60