GW Instek GDM-8200A Series - GDM-SC1 Scanner Specifications; Scanner Installation; Installation GDM-SC1 Scanner Specifications; Configure Scanner

GDM-8200A Series User Manual
72
GDM-SC1 Scanner Specifications
2-wire channel
16 pairs
Maximum current
2A (ch17, ch18)
4-wire channel
8 pairs
Resistance
2/4 wire
Single wire channel
N/A
Cold junction
N/A (internal)
Maximum voltage
250V
Connection
Screw terminal
Scanner Installation
Configure scanner
Open Scanner
cover
1. Take off four screws from the bottom panel of the
scanner.
2. Remove the top panel.