GW Instek GDM-8200A Series - Measurement Keys (Lower Row)

GETTING STARTED
15
°C/°F
(Temperature)
Measures Temperature (page37).
SHIFT + °C/°F
(SENSOR)
Selects the type of thermocouple
used in the Temperature
measurement (page38).
Measurement keys (Lower row)
AUTO/ENTER
A
s the AUTO key, selects the
measurement range automatically.
A
s the ENTER key, confirms the
entered value.
SHIFT → AUTO
(RATE)
Selects the measurement update rate:
Slow, Medium, or Fast (page22).
Up/Down
Selects the parameter in various
occasions: higher (
) or lower ( ).
HOLD
A
ctivates the Hold function (page48).
SHIFT → HOLD
(COMPare)
A
ctivates the Compare measurement
(page49).
TRIG (Trigger)
Triggers sample acquisition manually
(page59).
SHIFT → TRIG
(Int/Ext Trigger)
Selects the Internal or the External
trigger source (page59).
Left/Right
Selects the parameter in various
occasions: left (
) or right ( ).
REL
Measures the Relative value (page46).
SHIFT → REL
(RELative base)
Manually sets the reference value for
the Relative value measurement
(page46).