GDM-8200A Series User Manual
80
Setup Simple Scan
Panel operation
1. Press the Shift key, the 2
ND
key
(MENU), the Left key. The Scan
menu appears.
2. Press the Down key. The Simple
Scan menu appears.
3. Press the Down key again. The
Starting (Minimum) channel
setting appears.
4. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
Range
101 ~ 118, 201 ~ 218
5. When finished, press the
ENTER key. The End
(Maximum) channel setting
appears.
To Next Page
Loading...
