ADVANCED MEASUREMENT
55
1. Use the Left/Right key to move
the cursor (flashing point)
between high/low setting, digits,
and decimal point.
2. Change the parameter using the
Up/Down key.
3. Press the ENTER key to
confirm editing and move to
offset setting.
4. View Percentage
1st display
Shows the calculated result
2nd display
Indicates the Percentage measurement
MATH
Indicates Math operation
Dual Display Measurement
Background
ou can use the 2nd display to show another item, thus
iewing two different measurement results at once. The
following table shows the available options.
1
st
Display 2
nd
Display
ACV DCV ACI DCI Hz/P
ACV
DCV
ACV+DCV
— — — — —
ACI
DCI
ACI+DCI
— — — — —
To Next Page
Loading...
