GW Instek GDM-8200A Series - Continuity Test; Diode Diode Test; Continuity Continuity Test

BASIC MEASUREMENT
33
Continuity Test
Background
Continuity test checks that the resistance in the DUT is
low enough to be considered continuous (of conductive
nature).
1. Activate
continuity test
Press the key twice.
2. Continuity
mode display
appears
+ Ω
Indicates Continuity test
CONT 2nd display shows the title
3. Connect the
test lead and
measure
Connect the test lead between the 
and the COM port. The display
updates the reading.
COM