GW Instek GDM-8200A Series - Filter Setting

SYSTEM/DISPLAY CONFIGURATION
63
Filter setting
Step
1. Press the Shift key followed by
the MX/MN (Filter) key.
1st display
Shows the filter count
2nd display
Shows the filter type (flashing)
2. Select the filter type using the
Up/Down key.
3. Move the cursor to filter count
using the Left/Right key.
Change the value using the
Up/Down key.
4. Press the ENTER key to
confirm editing. The Filter
indicator appears on the display.
FILT
Indicates manual Filter setting