GW Instek GDS-1102A-U - MEASUREMENT; Basic Measurements

GDS-1000A-U Series User Manual
46
MEASUREMENT
The Measurement chapter describes how to
properly observe a signal using the oscilloscope’s
basic functions, and how to observe a signal in a
detailed manner using some of the advanced
functions such as:
Automatic measurements, cursor measurements,
and math operations.
Basic Measurements
This section describes the basic operations required in capturing and
viewing an input signal. For more detailed operations, see the
following chapters.
 Measurements → from page 46
 Configuration → from page 77
Activating a channel
Activating a
channel
To activate an input channel,
press the Channel key, CH1 or
CH2. The channel indicator
appears at the left side of the
display and the channel icon
changes accordingly.
CH 1
or
CH 2
(Continued on next page)