GW Instek GDS-1102A-U - Horizontal View Settings

GDS-1000A-U Series User Manual
84
Horizontal View
The Horizontal view section describes how to configure the
horizontal scale, position, waveform update mode, window zoom,
and X-Y mode.
Moving the waveform position horizontally
Procedure
The horizontal position knob
moves the waveform left or
right. The position indicator at
the top of the display shows the
center and current position.
Center position
Moving right
Selecting the horizontal scale
Select horizontal
scale
To select the timebase (scale),
turn the TIME/DIV knob; left
(slow) or right (fast).
TIME/DIV
Range
1ns/Div ~ 50s/Div, 1-2.5-5-10 increment
The timebase indicator at the bottom of the display
updates the current horizontal scale.