GW Instek GDS-1102A-U - Automatically Measuring the Input Signals

MEASUREMENT
57
2. Press the Measure key.
Measure
3. The measurement results appear on the menu
bar, constantly updated. All measurements are
derived from the cursor positions. See
Automatically measuring the input signals for
more details (page 57).
X
1
X
2
Horizontal Cursor
Gating
Turn gating off
4. Turn off cursors to turn off
gated automatic
measurements.
page 60
Automatically measuring the input signals
Viewing the
measurement
result
1. Press the Measure key.
Measure
2. The measurement results appear on the menu
bar, constantly updated. 5 measurement slots
(F1 to F5) can be customized.