GPT-10000 Series Quick Guide
18
AUTO Mode
AUTO mode indicates that the tester is automatic,
which consists of a sequential AUTO test of up to
10 MANU steps. Also, several groups of AUTO
tests can be further interconnected for an
advanced AUTO test.
1. Press the AUTO key on the front panel.
2. After entering the AUTO mode, first use the scroll
wheel to choose the AUTO group number
followed by pressing the DOWN arrow soft-key to
add desired MANU steps into the list of AUTO test.
3. Set the STEP HOLD action for each MANU step
and press the SKIP soft-key to dodge select MANU
step, if necessary. The parameters of each MANU
step should be set up in MANU mode in advance.
Refer to the User Manual for more details.
STEP HOLD soft-key
SKIP soft-keySTEP HOLD action for each step
To Next Page
Loading...
Need help?
General
