GW Instek PSW 80-27 - System:communicate:usb:front:state; System:communicate:usb:rear:state; System:error; System:klock

PSW Series User Manual
58
Parameter/Return
<string>
DNS in string format ( “mask”)
Applicable ASCII characters: 20H to 7EH
Example SYST:COMM:LAN:DNS “172.16.1.252”
Sets the DNS to 172.16.1.252.
SYSTem:COMMunicate:USB:FRONt:STATe
Query
Description
Queries the front panel USB-A port state.
Query Syntax SYSTem:COMMunicate:USB:FRONt:STATe?
Return parameter 0
<NR1>Absent
1
<NR1>Mass Storage
SYSTem:COMMunicate:USB:REAR:STATe
Query
Description
Queries the rear panel USB-B port state.
Query Syntax SYSTem:COMMunicate:USB:REAR:STATe?
Return parameter 0
<NR1>Absent
1
<NR1>USB-CDC
2
<NR1>GPIB-USB (GUG-001)
SYSTem:ERRor
Query
Description
Queries the error queue. The last error message is
returned. A maximum of 32 errors are stored in the
error queue.
Query Syntax SYSTem:ERRor?
Paramter/Return <NR1>,<string>
Returns an error code followed by
an error message as a string. The
string is returned as “string”.
Example SYSTem:ERRor?
-100, “Command error”
SYSTem:KLOCk
Set
Query
Description
Enables or disables the front panel key lock.