1341B9C8F55D
Ⓐ Restore speed setting/acceleration
button
Ⓑ ON/OFF button
Ⓒ Speed setting/deceleration button
Ⓓ Set speed release button
Turning on the system
1. Press button to light up the CCS
indicator on the combination instru-
ment, indicating that the cruise con-
trol system has been turned on.
2. Adjust to the required speed, then
press the button. The current
speed is set and the vehicle is run-
ning at this speed. The cruise speed
setting information will be displayed
on the multi-information display of
the combination instrument.
Increasing cruising speed
There are three methods to increase the
set speed:
〉
Press the button to increase the
speed.
〉
Press and hold the button to in-
crease the speed continuously.
〉
Step on the accelerator pedal to
accelerate to the desired speed, and
press button to set a new speed.
Reduce the cruise speed
There are three ways to reduce the
cruise speed:
〉
Press the button to reduce the
speed.
〉
Press the button to reduce the
speed continuously.
〉
Step on the brake pedal to reduce the
vehicle to the required speed, and
then press the
button to set a new
speed.
Accelerating temporarily
To accelerate temporarily during vehicle
speed setting, depress the accelerator
pedal. After accelerating, you can re-
lease the accelerator pedal to resume
the previously set speed.
Cancel the cruise speed
There are two ways to release the set
speed:
〉
Step on the brake pedal.
〉
Press the set speed release button on
the steering wheel.
When the set speed is canceled, the sys-
tem does not turn o and the CCS indi-
cator
on the combination instrument
remains illuminated.
Restore the set speed
When you have canceled cruise speed,
the system does not turn o. When the
128
2
Driving
To Next Page
Loading...