door in strong wind, as the back door
may open too wide, resulting in de-
formation of the back door.
〉
If the back door is frozen or covered
with snow and ice, do not open the
back door by force. Open the back
door after the temperature inside
the car rises by using the air condi-
tioning and heating functions.
When the back door must be opened
in an emergency, warm water should
be poured to melt the ice. Try to
open the back door after the icing
position is loose.
〉
Do not install or paste any orna-
ments on the back door support rod.
〉
Do not pull the back door laterally;
otherwise, it will lead to bending and
deformation of the support rod.
NOTICE
〉
When the ambient temperature is
lower than 0℃, the back door sup-
port rod may not support the back
door automatically. In this case, the
back door can be lifted manually to
be opened.
〉
Do not install heavy accessories on
the back door; otherwise, it may
cause the support rod to fail to sup-
port the back door smoothly.
〉
The telescopic movement of the back
door support rod needs oil-assisted
lubrication, so it is normal that there
may be oil stains near the dust cover
of the support rod.
Electric sensory back door
Opening
50C3AF891D65
〉
When you carry the intelligent key with
you, press the back door micro-switch.
〉
With the power supply switch in the
LOCK mode, press and hold the back
door control button on the key.
〉
When the driver's door is unlocked,
press the back door micro-switch.
〉
When the driver’s door is unlocked,
press the back door control switches
near the steering wheel.
04091290D786
24
1
Operation
To Next Page
Loading...