4. Use the safety clips in the vehicle to
pull out the fuses. Find the fuse of
the faulty electrical appliance accord-
ing to the fuse label and check it.
518A7B6272F2
CAUTION
〉
The fuse clip and the spare fuse are
located in the engine compartment
fuse box.
〉
Fuse labels are attached to the cover
of the engine room fuse box and that
of the instrument panel fuse box.
With these labels, the relationship
between fuses and electrical compo-
nents can be determined.
〉
Since there may be more than one
fuse causing the failure, it needs to
check all the fuses that may cause
the failure before the failure disap-
pears. If the failure cannot be elimi-
nated in the end, please contact serv-
ice provider for handling.
5. Check the wire inside the fuse. If it is
blown out, replace it with a spare
fuse with the same amperage.
6DC672024A26
Ⓐ Normal fuse
Ⓑ Blown fuse
WARNING
For blowout fuses, do not try to repair
or replace them with fuses with incon-
sistent colors or amperages; otherwise,
a re will occur due to cable overload.
6. Check whether the electrical compo-
nents return to normal operation.
CAUTION
If a spare fuse with the same amper-
age is blown out again in a short time
or the electrical components do not re-
turn to normal operation, it indicates
that the vehicle may have a serious
electrical system failure. At this junc-
ture, please contact service provider
for assistance in a timely manner.
Wiper blade
Front wiper blade replacement
You should regularly check the wiper
blade. Replace the wiper blade immedi-
ately if you discover the following condi-
tions:
256
6
Maintenance
To Next Page
Loading...