〉
If any adjustment is set for the seat
after the driver’s seat retreats a short
distance automatically, the seat will
not restore to the original position.
Driver’s seat memory
Power on the vehicle, and the driver’s
seat memory in non-personalized regis-
tration can be activated and deactivated
through 【Vehicle Settings】→【In-
Car】→【Body】 interface on the multi-
media display screen.
With activating this function, the current
position of the driver’s seat can be stor-
ed into the memory button. Touch the
memory button for a long time, the sys-
tem can memorize the current position
of the driver’s seat and remind that the
seat position is stored successfully.
Touch the memory button, the stored
position of the driver’s seat of this but-
ton can be shown.
NOTICE
〉
When using this function, you should
ensure that the ID number of 【Per-
sonal Center】 is not registered, oth-
erwise, the function cannot be used.
〉
After registering the ID number of
【Personal Center】, the system will
callout the saved position of the per-
sonalized setting.
Custom setup for seats
Register personal account trough【Per-
sonal center】on the multimedia host,
the function 【Custom setup】→【Per-
sonal setup of seat, rearview mirror】
can be activated or deactivated. After ac-
tivating this function, if the vehicle is in
on mode, the account will memorize the
current position of driver’s seat and po-
sition of rearview.
When registering the account next time,
the position of custom setup will be pop-
ped out automatically.
NOTICE
Due to dierent markets, some market
models do not have this function.
49
1
Operation
To Next Page
Loading...