H3C SecPath F1020 User Manual

7-49
Network data
encryption
module
Applicable firewalls Applicable slots
Applicable
software version
NSQM1F1KGMB
F1005, F1010 N/A N/A
F1020 Slot 1 R9345 and later
F1030, F1050, F1060, F1070,
F1080
Slots 1 and 2 R9345 and later
F1090 Slots 1 to 4 R8601P24 and later
NSQM1F1KGMC
F1005, F1010 N/A N/A
F1020 Slot 1 R9345P14 and later
F1030, F1050, F1060, F1070,
F1080
Slots 1 and 2 R9345P14 and later
F1090 Subslots 1 to 4 R8601P24 and later
Drives
CAUTION:
Do not hot swap drives.
Table7-3 describes the compatibility between drives and F10X0 firewalls.
Table7-3 Drive compatibility with F10X0 firewalls
Drive F1005/F1010
F1020/F1030/
F1050/F1060
F1070/F1080 F1090
NS-SSD-480G-SATA-SFF Yes Yes Yes Yes
NS-HDD-500G-SATA-SFF No Yes No Yes
NS-HDD-1T-SATA-SFF No Yes No Yes
Power modules
The F1070/F1080/F1090 firewall comes with power module slot PWR0 installed with a filler panel
and power module slot PWR1 empty. It supports both AC and DC power modules. No power
modules are provided with the firewall. Prepare power modules for the firewall yourself as required.
The F1070/F1080/F1090 firewall supports hot swapping of power modules and 1+1 power module
redundancy. To install two power modules for the firewall, make sure they are the same model.
Table7-4 Power modules available for the firewall
Firewall model
Available power modules
F1005/F1010 One built-in power module
F1020/F1030/F1050/F1060 Two built-in power modules
F1070/F1080
Two power module slots, supporting the following power
modules:
• PSR150-A1

H3C SecPath F1020 Specifications

General

Brand	H3C
Model	SecPath F1020
Category	Firewall
Language	English