H3C UniServer R6900 G3 Operating System Installation Guide

6
Figure 4 PXE boot options in Legacy boot mode
Enabling PXE (for H3C UniServer R6900 G3)
1. Enter the Front Page.
2. Select Setup Utility.
3. Click the Boot tab, and then set Network Stack to Enabled.
4. Select UEFI:IPV4/IPV6 for PXE Boot Capability.
Figure 5 Enabling PXE
5. Press F4 to save the configuration and reboot the server.
6. Enter the Front Page, and then select Windows Boot Manager.

H3C UniServer R6900 G3 Specifications

General

Brand	H3C
Model	UniServer R6900 G3
Category	Server
Language	English