12-4
Configuration procedure
1) Configure the HTTP server Device.
# Create basic ACL 2000, allowing packets with the source IP address in 10.1.1.0/24.
<Device> system-view
[Device] acl number 2000
[Device-acl-basic-2000] rule permit source 10.1.1.0 0.0.0.255
[Device-acl-basic-2000] quit
# Associate the HTTP service to ACL 2000.
[Device] ip http acl 2000
# Enable the HTTP service.
[Device] ip http enable
2) Verify the configuration.
z If you open the IE on Host A, and type http://10.1.1.1, you can open the Web login page of Device.
z If you open the IE on Host B, and type http://10.2.1.1, you cannot open the Web login page of
Device.
To Next Page
Loading...
Need help?
General
